Glossary of the Kratky method
From Kratky Method Hydroponics, a reference on passive, non-circulating hydroponics
This glossary of the Kratky method defines the terms used in Dr. Bernard A. Kratky's papers on passive, non-circulating hydroponics and on this site. Each definition comes from his University of Hawaii publications, cited at the end of the entry, and links to the page that covers the term in more depth.
Jump to: A · B · C · D · E · F · K · M · N · O · R · S · T · W
A
- Air space (moist air space)
- The layer of humid air that forms between the cover and the nutrient solution as plants use the solution. Roots in it take in oxygen, and the cover keeps it moist so they do not dry out.[2] See Kratky method hydroponics.
- Ammonium sulfate
- A fertilizer Kratky uses to lower the pH of a solution that has become too basic: plants release hydrogen ions as they take it up. One approach is a stock of 12 g per liter added at the same rate as the other stocks.[2]
B
- Bacillus thuringiensis subsp. israelensis (Bti)
- A bacterial toxin used to control mosquito larvae in still nutrient solution, one of several mosquito controls in Kratky's work.[2]
- Beadboard (expanded polystyrene)
- Polystyrene foam board used as a tank cover when the cover rests on the tank frame. It is not suitable for floating covers, because its occasional air pockets let it waterlog and grow algae.[2]
- Bottle method
- The simplest Kratky system: one lettuce plant in a net pot held by the neck of a darkened 4-liter bottle of nutrient solution, for crops that need less than 4 liters of water in their lifespan.[1] See Kratky bottle method.
C
- Capillary action (capillary wetting)
- The wicking of solution up through the growing medium from the immersed base of a net pot. It waters the seedling automatically until the solution falls below the pot, by which time roots have grown out to reach it.[2]
- Capillary tube method
- Kratky's first published design, in which seedlings grow in tapered tubes of medium held by a light-blocking lid over a closed container. It is the subject of his 1995 patent.[6] See Kratky capillary tube method.
- Cover (top cover)
- The lid or board over a Kratky tank. It holds the net pots, blocks light and keeps the air space humid. In the frame-supported design it rests on the sides of the tank.[2]
- Covered tank
- The commercial Kratky system: a shallow, plastic-lined tank, filled with 1.5 to 2 gallons of solution per plant and covered with polystyrene sheets resting on the frame.[4] See Kratky covered tank method.
D
- Dolomite
- Ground limestone Kratky uses to raise the pH of a solution that has become too acidic. It is hung in the tank in a nylon stocking until the pH normalizes, so no undissolved residue is left.[2]
E
- EC (electrical conductivity)
- A reading of how much fertilizer salt is dissolved in the solution, given in millisiemens (mS). Kratky's lettuce tanks start at an EC of about 1.5 mS.[2]
- Extruded polystyrene
- Polystyrene board with an even structure and no large air pockets, so it does not waterlog. It is the board used for floating and float-support covers.[2]
F
- Fill once (single application)
- The defining feature of the method: all of the water and nutrients a crop needs are added before planting, and nothing more is added until harvest.[1]
- Float-support method
- A design in which the plant board floats on the solution at planting and then comes to rest on pipes on the tank floor as the level falls, opening an air space of 3 to 9 cm by harvest.[2] See Kratky float-support method.
- Floating cover (raft)
- A board that floats on the solution for the whole crop, leaving no air space. In Kratky's lettuce experiments it cut yields by up to 23 percent compared with a cover held by the tank frame.[2]
- Forestry tube
- A tapered plastic tube made for tree seedlings. With extra holes drilled in its sides it can replace a net pot, and Kratky uses it for cucumbers.[1]
K
- Kratky method
- A passive, non-circulating hydroponic method developed by Bernard A. Kratky at the University of Hawaii, in which a crop grows on a single application of nutrient solution under a cover, with no electricity or pumps.[1] See Kratky method hydroponics.
M
- mS (millisiemens)
- The unit of EC readings. Kratky's lettuce solutions run from about 1.5 to 2.5 mS at planting.[1]
N
- Net pot
- A tapered plastic pot with slits that let roots grow out. It holds the growing medium and the plant, and sits in a hole in the cover with its lower part in the solution.[1]
- Non-circulating hydroponics
- Hydroponics in which the nutrient solution is neither pumped around nor aerated. Kratky's method needs no electricity, pumps or wicks.[2]
- Nutrient solution
- Water with hydroponic fertilizer dissolved in it. In a Kratky system it is the only source of water and nutrients for the whole crop.[1]
O
- Oxygen roots
- Roots growing in the moist air space above the solution, whose main function is aeration. They become thicker and more branched so they can absorb more oxygen. The term comes from H. Imai's 1987 description of a non-circulating system.[1][2]
R
- Raceway
- A long rectangular tank used for floating boards, so a whole raft can be pulled to a harvest station. Kratky's raceways are 14 cm deep and about 1.25 m wide.[2]
- Rain shelter
- A plastic-covered structure that keeps rain out of the tanks. Rain would raise the solution level and submerge the oxygen roots, so commercial Kratky tanks sit in rain shelters or greenhouses.[4]
- Ratoon crop
- A "cut and come again" harvest taken from the original planting instead of replanting. Kratky's watercress can be grown this way.[5]
S
- Stock solution
- A concentrated fertilizer solution added to the tank water to make the nutrient solution. Kratky uses two stocks in equal volumes: a complete fertilizer with magnesium sulfate, and calcium nitrate on its own.[2]
- Suspended pot method
- Kratky's own name for the method: plants grow in containers suspended by a fixed cover over a tank, with their lower part first immersed in the solution.[1]
T
- Tipburn
- Browning of lettuce leaf edges. In Kratky tanks it is a risk when salts from poor-quality water concentrate as the solution is used.[2]
- Topping off
- Adding fresh solution to what is left after harvest instead of draining the tank. It worked for at least three lettuce crops in a row in the 2008 trials; as a general rule, tanks are drained and refilled after every three crops or sooner.[3][2]
W
- Water and nutrient roots
- Roots that reach into the solution and take up water and nutrients. They grow only so far, because the solution holds less oxygen the deeper it is.[2]
- Water use (liters per kilogram)
- The water a crop uses for each kilogram harvested. Kratky's lettuce used 11 to 14 liters per kilogram in Hawaii and 18 to 32 in Pennsylvania.[3] See Kratky method water use.
See also
References
- Kratky, B.A. (2004). "A suspended pot, non-circulating hydroponic method." Acta Horticulturae 648: 83–89. PDF.
- Kratky, B.A. (2009). "Three non-circulating hydroponic methods for growing lettuce." Acta Horticulturae 843: 65–72. PDF.
- Kratky, B.A., G.T. Maehira, E.J. Magno, M.D. Orzolek and W.J. Lamont (2008). "Growing lettuce by a float-support non-circulating hydroponic method in Hawaii and Pennsylvania." Proceedings of the 34th National Agricultural Plastics Congress. PDF.
- Kratky, B.A. (2010). A Suspended Net-Pot, Non-Circulating Hydroponic Method for Commercial Production of Leafy, Romaine, and Semi-Head Lettuce. University of Hawaii CTAHR, Vegetable Crops VC-1. PDF.
- Kratky, B.A. (2015). Growing Direct-Seeded Watercress by Two Non-Circulating Hydroponic Methods. University of Hawaii CTAHR, Vegetable Crops VC-7. PDF.
- Kratky, B.A. "Non-circulating hydroponic plant growing system." U.S. Patent 5,385,589, filed August 5, 1992, issued January 31, 1995. Patent.