Kratky capillary tube method
From Kratky Method Hydroponics, a reference on passive, non-circulating hydroponics
Part of Kratky system designs.
| Inventor | Bernard A. Kratky[1] |
|---|---|
| Assignee | University of Hawaii[1] |
| Filed | August 5, 1992[1] |
| Patents | U.S. 5,385,589 (1995) and its division U.S. 5,533,299 (1996)[1][2] |
| Plant holder | Tapered tube, 5 to 9 in long, with side holes[1] |
| Model crop | Leaf and semi-head lettuce[1] |
The Kratky capillary tube method is the first published form of the Kratky method: seedlings grow in tapered tubes of growing medium held by a light-blocking lid over a closed container of nutrient solution, and the medium is wetted by capillary action from the solution below.[1] Kratky filed the patent for it on August 5, 1992, and described it for growers in a 1993 HortTechnology paper titled "A capillary, non-circulating hydroponic method for leaf and semi-head lettuce".[1][3] His later bottle and tank designs keep the same idea but use net pots.
Design
The patent describes a kit made of a water-tight container, a light-blocking lid with holes, reusable tapered tubes, a bag of growing medium and fertilizer packets.[1] A 3 to 5 gallon rectangular plastic container is preferred for the kit, though buckets, coolers, lined pits and plywood tanks lined with polyethylene are also described.[2]
- Tubes. Tapered tubes 5 to 9 inches long, open at the top, with side holes of about 1/4 to 1/2 inch so roots can grow out at several levels. Optional vertical fins inside discourage roots from circling.[1]
- Lid. The lid blocks light, holds the tubes, slows evaporation and keeps rain out.[2]
- Nutrients. The amount of nutrient solution is chosen to last the whole crop without being replenished.[1]
How the solution level behaves
At planting, the solution is about 75 mm deep and the lower end of each tube sits about 25 mm in it, so the medium wicks up solution and the seedling is watered.[1] Roots grow out of the side holes while the holes are still under the solution. Over four to five weeks of lettuce growth the level falls below the tubes. The roots follow it down: the upper roots end up in moist air and the lower roots stay in the solution.[2]
The patent recommends ending with about 30 mm of solution, about 20 mm below the tube ends. In the trials, the medium stayed moist when the solution was 20 mm below the tubes, but was often dry when it was 40 mm or more below them.[1] Because roots from neighboring plants intermingle under the lid, lifting the lid during the crop tears them, so the lid stays in place until harvest.[2]
Lettuce trials
The trials reported in the patent used a 9.7 m by 1.2 m tank lined with polyethylene in a greenhouse, covered with white-painted plywood. Nineteen-day-old 'Green Ice' leaf lettuce seedlings were set in 40 mm by 218 mm tapered tubes. The starting solution had a pH of 6.5 and an EC of 1.0 mS.[1]
| Spacing | Head weight |
|---|---|
| 200 × 230 mm | 157 g |
| 200 × 250 mm | 188 g |
| 250 × 250 mm | 195 g |
All heads were marketable. Two further trials at 200 by 230 mm gave 176 and 187 g heads 35 days after transplanting. At harvest about 30 mm of solution remained, at an EC of 0.5 mS and a pH of 7.5.[1] Water use was 14.4 liters per kilogram of 'Green Ice' and 12.6 liters per kilogram of 'Green Mignonette' semi-head lettuce.[1] The patent notes that short crops such as kai choy suit the system better than long crops such as tomatoes.[1]
Commercial tanks
Kratky's 1993 paper is cited for the simplest commercial tank: 3.8 by 8.9 cm lumber nailed to a 1.2 by 2.4 m sheet of 1.9 cm plywood and lined with two layers of 0.15 mm black polyethylene.[4] The same tank later carried the net-pot version described under the covered tank method.
Relation to later designs
Kratky's later papers cite both patents as the source of the method's core concepts: a container supported by a fixed cover, its lower part first immersed, and a solution level that then drops below it.[4] The 2004 paper still lists tapered forestry tubes with extra holes drilled in their sides as an alternative to net pots.[4]
See also
References
- Kratky, B.A. "Non-circulating hydroponic plant growing system." U.S. Patent 5,385,589, filed August 5, 1992, issued January 31, 1995. Patent.
- Kratky, B.A. "Non-circulating hydroponic plant growing system." U.S. Patent 5,533,299, filed December 16, 1994 as a division of 5,385,589, issued July 9, 1996. Patent.
- Kratky, B.A. (1993). "A capillary, non-circulating hydroponic method for leaf and semi-head lettuce." HortTechnology 3(2): 206–207.
- Kratky, B.A. (2004). "A suspended pot, non-circulating hydroponic method." Acta Horticulturae 648: 83–89. PDF.