Kratky bottle method

From Kratky Method Hydroponics, a reference on passive, non-circulating hydroponics

Part of Kratky system designs.

Bottle method
Container4-liter plastic bottle, covered or darkened[1]
PlantsOne[1]
Fertilizer5 g of complete hydroponic fertilizer[2]
Net pot immersionLower 3 cm at planting[2]
Level drop by harvest15 to 25 cm[2]
HarvestAbout 6 to 7 weeks from seeding[2]
Origin2002 University of Hawaii home-garden kit (HG-42)[3]

The Kratky bottle method is the simplest form of the Kratky method: one lettuce plant grows in a net pot held by the neck of a darkened 4-liter plastic bottle of nutrient solution, and it reaches harvest on that single fill with no further care.[2] It grew out of a 2002 University of Hawaii home-garden kit that used a one-gallon bottle, which Kratky later called the prototype for his commercial method.[4]

Setup

  1. Fill a 4-liter plastic bottle with water to within 4 cm of the top, and add 5 grams of a complete granular hydroponic fertilizer. Kratky used Chem-Gro 10-8-22 with other nutrients.[2]
  2. Cover or darken the bottle to discourage algae.[2]
  3. Fill a tapered net pot (Kratky's was 7.5 cm long) with growing medium. A tapered forestry tube with extra holes drilled in its sides also works.[1]
  4. Seed or transplant lettuce into the pot and rest the pot in the bottle's neck, so its lower 3 cm sits in the solution.[2]

Nothing else is added until harvest.

How the plant grows

At first the whole medium in the net pot is wetted by capillary action, so the young plant waters itself. As the plant grows, the solution falls below the pot and can no longer wet it directly, but by then the new roots below the pot absorb the water and nutrients the plant needs.[1] Roots in the moist air above the solution become thicker and more branched so they can absorb more oxygen.[1]

By harvest the level has typically dropped 15 to 25 cm. That growing air zone does not slow the plant, which follows lettuce's normal pattern of very fast growth near maturity.[1]

Water limit

In Hilo, Hawaii, a 200 gram lettuce plant typically used only about 3 to 4 liters of EC 1.5 mS nutrient solution,[1] so the bottle suits lettuce and other short crops that need less than 4 liters over their life.[2] Kratky noted that cucumbers or tomatoes can be grown in a bottle only by letting the level drop about 20 cm and then holding it there with a float valve or by repeated additions, which "defeats the simplicity" of the method.[1] Long crops are covered under Kratky systems for tomatoes and cucumbers.

Variations

  • Three or four lettuce plants in a 20-liter plastic bucket with a lid.[2]
  • Six to eight lettuce plants in a plastic storage container or an ice chest.[2]

Scaled up further, the same idea becomes the commercial covered tank method.

Uses

Kratky described three groups of users for the bottle. Gardeners can grow lettuce on lanais, porches and under the overhangs of buildings. Educators can prepare the bottles in one class period, with no daily care and "no need for weekend watering". Researchers and farmers can use them for nutrition studies, pesticide tests and seed production.[2]

See also

Further reading

Practical guides from related Kratky sites. These are not sources for the facts on this page.

References

  1. Kratky, B.A. (2004). "A suspended pot, non-circulating hydroponic method." Acta Horticulturae 648: 83–89. PDF.
  2. Kratky, B.A. (2009). "Three non-circulating hydroponic methods for growing lettuce." Acta Horticulturae 843: 65–72. PDF.
  3. Kratky, B.A. (2002). A Simple Hydroponic Growing Kit for Short-Term Vegetables. University of Hawaii CTAHR, Home Garden HG-42. Catalog record.
  4. Kratky, B.A. (2010). A Suspended Net-Pot, Non-Circulating Hydroponic Method for Commercial Production of Leafy, Romaine, and Semi-Head Lettuce. University of Hawaii CTAHR, Vegetable Crops VC-1. PDF.